亚洲va中文字幕欧美不卡-亚洲va在线va天堂成人-亚洲va在线va天堂va手机-亚洲va在线va天堂va888www-久一视频在线-久污tv

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當前位置:

首頁 News Industry information

Adjustment and improvement of plastic shell material shortage

Release time:2022-03-21

Shell shortage, also known as lack of glue, insufficient filling, insufficient injection, incomplete plastic shell, etc., is the most common problem we encounter in plastic shell injection molding every day, which is usually manifested in the end of the molding area and the position of fine ribs. Compared with other defects, the debugging is simple, which can be solved by increasing the injection pressure, injection speed, injection position and other methods in the process, but sometimes other factors are not excluded.

6.jpg


Adjustment and improvement methods leading to the shortage of plastic shell materials


1. The setting of injection molding conditions is unreasonable. The injection pressure is too low, the injection speed is too slow, the injection position is too short, and the molding time is too short. Because the amount of glue required for the plastic shell is not enough, the plastic shell is not filled enough (adjust the value of each parameter appropriately).


2. Whether the injection molding machine has back pressure. If the injection molding machine has no back pressure, or the back pressure of the stored material is too small, the dissolved material is not evenly compacted to ensure uniformity and homogeneity, resulting in insufficient filling of the plastic shell (appropriately increase the back pressure).


3. Whether the heating ring of the barrel nozzle is damaged and whether the thermocouple is clamped improperly. If the heating ring does not reach the rated temperature, the nozzle will condense, and the resistance during melt injection filling is too large, resulting in insufficient filling of the plastic shell (replace the heating ring and tighten the thermocouple).


4. Check nozzle blockage by discharging empty bullets. If the nozzle is blocked by iron and the filling is unstable during production, the plastic shell is often accompanied by the phenomenon of more glue and less material (clean the nozzle in time).


5. Residual material in nozzles and intersections / drums and flanges. If there is material left behind the mold, the plastic shell will lack material due to insufficient pressure in the mold cavity during the injection filling process (solve the problem of material shortage in time).


6. The mold temperature is uneven or too low. If the temperature of the mold is too low, the solution will condense too early during filling and cannot be filled to the set position, resulting in insufficient plastic shell. (increasing the mold temperature and changing the series water circuit to parallel connection can also appropriately shorten the molding cycle).


7. For materials with poor fluidity, such as PC, PA, POM, etc., you can increase the diameter of the runner and gate on the mold, technically increase the temperature of the barrel, increase the mold temperature regulator, and add additives to the materials to improve the fluidity, so that the melt can quickly reach the set position in the mold cavity to avoid material shortage of the plastic shell (appropriately increase the mold temperature).

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 天天艹天天 | 五月婷婷六月丁香综合 | 色站app | 手机看片午夜 | 全免费一级午夜毛片 | 日韩欧美网站 | 亚洲成a人片77788 | 色狠狠综合 | 天堂在线亚洲 | 在线观看视频污 | 天天躁日日躁狠狠躁综合 | 色综合久久88中文字幕 | 在线免费精品视频 | 色在线网站免费观看 | 依人在线免费视频 | 青青草手机视频在线观看 | 日韩欧美中文字幕一区 | 亚洲乱码一二三四五六区 | 日日夜夜中文字幕 | 欧美性天天| 午夜视频你懂的 | 亚洲性在线 | 亚洲精品免费在线观看 | 日本翁熄系列乱在线视频 | 日韩精品一区在线观看 | 色呦呦在线看 | 伊人五月综合 | 日本高清www视频在线观看 | 日本 韩国 三级 国产 欧美 | 欧美一级免费 | 青青青草视频在线 | 亚洲a视频在线 | 日本视频不卡 | 日韩精品亚洲专区在线影视 | 欧美中文娱乐网 | 性欧美xxxx | 色天使久久 | 青青青在线网站视频在线 | 天堂网www在线资源链接 | 日本视频免费看 | 在线看片亚洲 |