亚洲va中文字幕欧美不卡-亚洲va在线va天堂成人-亚洲va在线va天堂va手机-亚洲va在线va天堂va888www-久一视频在线-久污tv

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當(dāng)前位置:

首頁(yè) News Industry information

Plastic mold injection molding process

Release time:2024-03-27

Plastic moldInjection moldingThe whole process of molding includes feeding, plasticizing, mold filling, pressure maintaining, backflow, cooling and demoulding.


(1) Feeding

In the process of plastic mold injection molding, granular or powdered plastic needs to be added to the hopper of the injection machine, and then brought into the barrel by the plunger or screw for heating.


(2) Plasticization

The process of granular or powdery plastic heating and melting in the barrel in a flowing state is called plasticization.


(3) Mold filling

The molten plastic melt is pushed by the plunger or screw of the injection machine, enters the cavity of the plastic mold through the nozzle and gating system of the mold at a certain pressure and speed, and fills the cavity after a certain time. This stage is the mold filling stage in the plastic mold injection molding process.


(4) Pressure maintaining

After filling, under the push of the plunger or screw of the injection machine, the melt still maintains a certain pressure, so that the molten plastic in the barrel continues to enter the cavity, which is used to supplement the shrinkage of the plastic in the cavity of the plastic mold, so as to increase the density of the plastic parts and reduce the shrinkage of the products and the surface defects of the products. This stage is the stage of maintaining pressure in plastic mold injection molding.


(5) Backflow

After the pressure maintaining is completed, the plunger or screw of the injection molding machine will retract, which will release the pressure of molten plastic in the plastic mold cavity. At this time, the pressure of molten material in the cavity will be higher than that in front of the gate. If the gate has not condensed at this time, the molten material in the cavity will flow back to the pouring system of the mold through the gate, causing defects such as shrinkage, deformation and loose texture of the product. This phenomenon is called backflow. If the gate has condensed when the injection pressure is removed, there will be no backflow. Therefore, we can see whether backflow will occur and the degree of backflow is directly related to the holding time. Generally, if the pressure holding time is too long, the probability of backflow will be smaller.


(6) Cooling

The cooling process of plastic parts in the plastic mold refers to the whole process from the plastic melt at the gate to the plastic parts being pushed out of the mold cavity. At this time, stop feeding or backflow, and the plastic in the mold cavity continues to cool and set.


(7) Demoulding

When the product is cooled to a certain temperature and has sufficient strength to prevent warpage and deformation, the mold can be opened, and then the plastic part can be pushed out of the mold under the action of the ejector mechanism. This stage is the demoulding stage in plastic mold injection molding.

2.jpg

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 永久免费精品影视网站 | 青青草原在线 | 四虎在线永久免费视频网站 | 香蕉免费一区二区三区 | 亚洲h视频| 天天爱天天做色综合 | 亚洲精品永久免费 | 一级做a免费视频 | 亚洲免费视频在线观看 | 午夜视频h | 日韩三| 日本欧美不卡一区二区三区在线 | 亚洲永久精品网站 | 欧美一级高清视频在线播放 | 午夜片在线观看 | 亚洲人成激情在线播放 | 亚洲第一色网 | 日本三级韩国三级欧美三级 | 手机看免费毛片的网站 | 婷婷综合激情五月中文字幕 | 色尼玛图 | 青娱乐最新地址 | 欧美一级在线免费观看 | 欧美视频二区 | 特黄a大片免费视频 | 色妞影视| 日韩在线aⅴ免费视频 | 日韩国产在线 | 欧美亚洲桃花综合 | 日日日干| 日韩欧美色视频 | 天天摸夜夜添久久精品麻豆 | 欧美亚洲一区二区三区导航 | 欧美在线播放一区二区 | 视频国产91 | 色综合久久久久久久久五月 | 青青草免费在线观看视频 | 手机看片日韩日韩国产在线看 | 全部免费特黄特色大片视频 | 软萌小仙自慰喷白浆 | 日韩精品久久久毛片一区二区 |