亚洲va中文字幕欧美不卡-亚洲va在线va天堂成人-亚洲va在线va天堂va手机-亚洲va在线va天堂va888www-久一视频在线-久污tv

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當前位置:

首頁 News Industry information

Operating rules of injection molding

Release time:2024-05-29

Our friends who struggle in the production line know itInjection moldingThere are some operating rules. We should know that safety is the primary productive force.


Injection molding machine is a complex machine with high temperature, high pressure and fast operation. The operator often neglects for a while, causing irreparable physical injury, and regrets for life. Every step of the operation of the injection molding machine is dangerous, especially when opening and locking the mold. In order to avoid danger, the operator must pay attention to the following details of safe operation during injection molding:

2.jpg


1. The injection molding factory shall keep the injection molding machine and its surrounding environment clean at all times. The space around the injection molding machine shall be kept as unobstructed as possible. After adding lubricating oil or pressure oil, the leaked oil shall be wiped clean as soon as possible. Before turning on the electric heating, please clean up the sundries (such as rubber particles) on the glue melting cylinder to avoid fire. If the machine is not overhauled or necessary, the heat insulation protective cover on the glue melting cylinder shall not be removed at will.


2. Before injection molding, check whether the mold locking can be terminated by pressing the emergency button or opening the safety door during operation.


3. When the shooting platform moves forward, it is not allowed to remove the deep glue leaked from the shooting nozzle by hand, so as to avoid pinching your hand between the shooting platform and the mold, causing physical injury. When cleaning the barrel, adjust the temperature of the nozzle to the appropriate high temperature, keep the nozzle unobstructed, and then use a lower injection pressure and speed to remove the residual rubber in the barrel. When cleaning, do not directly touch the newly injected rubber with your hands to avoid scalding.


4. Avoid placing heat sensitive and corrosive plastics in barrels for too long, and strictly follow the closing and cleaning methods provided by the plastic supplier. When replacing plastics, it is necessary to ensure that the new and old plastics will not produce chemical reaction after mixing (for example, if POM and PVC are mixed and heated successively, toxic gases will be produced); Otherwise, other plastics must be used to remove residues from the barrel.


5. Do not cancel the safety door or safety switch in order to improve the production speed. Before injection molding, check whether the mold is firmly installed on the moving template and head plate of the injection molding machine. Pay attention to whether the ground wire and other wiring of the injection molding machine are firmly connected.


6. When installing the mold, the lifting ring must be completely screwed into the mold lifting hole before lifting. After the mold is installed, the length of the safety rod of the injection molding machine should be adjusted according to the size of the mold, so that when the safety door is opened, the machine safety stop (mechanical lock) can fall down to prevent the mold locking of the injection molding machine.


7. During the normal injection molding process, it is strictly forbidden for the operator to take out the injection molded parts from above or below the injection molding machine without opening the safety door. In case of mold maintenance or temporary shutdown, the oil pump motor of the injection molding machine should be shut down in time.


8. Injection molding can be operated by one person, and multiple people are not allowed. It is strictly forbidden for one person to operate the control panel while the other person adjusts the mold or does other operations at the same time.


Every operator of the injection molding plant should keep the above regulations in mind and ensure production safety while creating benefits.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 性导航app精品视频 性荡视频在线播放视频 | 四虎在线最新永久免费播放 | 日本不卡高清免费v日本 | 午夜欧美精品久久久久久久 | 亚洲日本欧美日韩高观看 | 中国日韩欧美中文日韩欧美色 | 综合88 | 亚洲高清网站 | 青草国产精品久久久久久久久 | 青草伊人网 | 色综合天天综合高清网国产 | 欧美视频在线观看第一页 | 亚洲专区区免费 | 欧美在线视频不卡 | 网站免费观看 | 我怒了在线播放完整版 | 亚洲欧美精品在线 | 手机看片福利盒子久久青 | 四虎 在线播放 | 先锋资源久久 | 日本在线网址 | 天天操天天干天天玩 | 五月激情综合网 | 日韩经典一区 | 日韩一区精品视频在线看 | 在线观看一区 | 日日摸夜夜添夜夜添97 | 青草欧美 | 午夜精品久久久久久久99热 | 亚洲福利国产 | 亚洲色视频在线播放网站 | 欧美性开放视频 | 天天躁狠狠躁夜夜躁2021 | 性感美女视频黄.免费网站 性感保姆正片 | 亚洲精品福利在线观看 | 欧美综合国产 | 亚洲手机在线观看 | 日韩中文字幕精品免费一区 | 亚洲欧洲eeea在线观看 | 欧美性猛交xxxx乱大交be | 色综合久久中文字幕网 |